基于数值模拟的嘉兴城区河网水文特征

基于MIKE 11河网水动力模型,利用2010年—2019年实测气象水文资料,分析了嘉兴城区大包围圈内外主要河流的入流和出流特征.结果显示:嘉兴城区主要来流河道是苏州塘和杭州塘,出流河道主要为长纤塘、嘉善塘和平湖塘;平均来流量为88.2 m3/s,出流量为93.3 m3/s;年均和月均来流量变化较大,最枯月的平均来流量为50.1 m3/s,90％保证率枯水月的平均来流量为59.3 m3/s;大包围圈内部河道的平均流量为28.3 m3/s,平均出流量为19.1 m3/s,这表明大量外部来水未进入大包围圈内部河道,而是通过环郊河"短路"绕过嘉兴城区,流向东北;大包围圈内部河道的最枯月平均入流量为14.5 m3/s,90％保证率枯水月的平均入流量为18.3 m3/s.研究结果可为嘉兴城区河网综合规划和生态治理提供科学依据.     

铁的磷酸盐纳米颗粒的控制合成及表征

以FeCl3·6H2O、Na3 PO4和NaAc为原料,以乙二醇与水的混合物为溶剂,通过溶剂热法在210℃的条件下反应8h制备了铁的磷酸盐纳米颗粒.通过改变溶剂中乙二醇与水的量、Na3PO4的量、NaAc的量可以得到不同尺寸的铁的磷酸盐纳米颗粒样品.利用扫描电子显微镜(SEM)和X-射线粉末衍射(XRD)手段对产物的形貌和结构进行了表征和研究.     

斑衣蜡蝉在葡萄上的危害及防治措施

斑衣蜡蝉是一种危害多种林木和果树的重要刺吸性害虫,主要分布于中国、日本、越南、韩国、印度和美国等地。该虫在经济林木中最喜危害葡萄,目前在宁夏地区随着转换寄主,现已扩散到了部分葡萄园,成为贺兰山东麓酿酒葡萄的重要虫害之一。为全面了解其研究进展,本文概述了国内外关于斑衣蜡蝉的寄主植物、形态特征、危害状况、发生规律、生活习性、诱发因素及防治措施等研究现状,以期为防治该虫,寻求进一步研究方向及探讨新的防治途径提供帮助。     

Synthesis and performance evaluation of a new drag reducer based on acrylamide/12-allyloxydodecyl acid sodium

Hydraulic fracturing with slickwater is a field-proven stimulation technology used in tight reservoirs. Because of the high pumping rate associated with slickwater fracturing, drag reduction (DR) is critical in minimizing pressure drop and the success of oilfield operations. In this paper, a new type of drag reducer (SPR) was synthesized with acrylamide and 12-allyloxydodecyl acid sodium, and its drag reduction performance was evaluated. The results showed that the new drag reducer features low molecular weight, fast-dissolving rate and low interfacial tension. The algorithm of estimating the drag reduction rate of non-Newtonian fluid SPR was proposed and validated. Empirical or semianalytical models for estimating the friction ratio (σ) or friction factor (λ or f) were used to simulate the turbulence behavior of the SPR drag reducer under different Reynolds numbers (Re). The modified Virk's correlation could accurately model the turbulent behavior of the SPR drag reducer. A unified calculation formula was established in this study for different pipe diameters.     

含锡废液的安全处理技术研究

论述了两级沉淀法对含锡废液的处理技术,通过实验得到两级沉淀法处置含锡废液的最优条件,实现了含锡废液的安全有效快速处理.     

污水处理场废气生物处理装置提标

VOCs是形成臭氧的重要前体物,加强VOCs治理是现阶段控制臭氧污染的有效途径.废气生物处理装置为满足新的排放要求改造前应先对废气组分进行分析,并筛选合适的菌种进行接种以降低后续提标装置的投资.可采用吸附技术或高级氧化技术对生物处理装置出气进行提标处理.提标工艺如采用吸附技术需考虑吸附剂脱附产生物质的再处理.     

梁结构振动支承约束反力控制

支承或连接构件对梁结构的动力学性能有至关重要影响,必须保证其在振动过程中不发生破坏或者失效。通过合理设计和布局附加弹性支承可以实现对这些重要连接构件所承受约束反力的控制。应用微分变换法推导含附加支承的梁结构支承约束反力及其对于附加支承位置和刚度的灵敏度表达式,并通过优化设计附加支承位置和刚度实现具有弹性约束端的简支梁结构各支承约束反力的平衡,可提高结构的动力学性能。     

A Biologically Muscle-Inspired Polyurethane with Super-Tough,Thermal Reparable and Self-Healing Capabilities for Stretchable Electronics

Polymeric elastomers play an increasingly important role in the development of stretchable electronics. A highly demanded elastic matrix is preferred to own not only excellent mechanical properties, but also additional features like high toughness and fast self-healing. Here, a polyurethane (DA-PU) is synthesized with donor and acceptor groups alternately distributed along the main chain to achieve both intra-chain and inter-chain donor-acceptor self-assembly, which endow the polyurethane with toughness, self-healing, and, more interestingly, thermal repair, like human muscle. In detail, DA-PU exhibits an amazing mechanical performance with elongation at break of 1900% and toughness of 175.9 MJ m⁻³. Moreover, it shows remarkable anti-fatigue and anti-stress relaxation properties as manifested by cyclic tensile and stress relaxation tests, respectively. Even in case of large strain deformation or long-time stretch, it can almost completely restore to original length by thermal repair at 60 °C in 60 s. The self-healing speed of DA-PU is gradually enhanced with the increasing temperature, and can be 1.0–6.15 µm min⁻¹ from 60 to 80 °C. At last, a stretchable and self-healable capacitive sensor is constructed and evaluated to prove that DA-PU matrix can ensure the stability of electronics even after critical deformation and cut off.     

双目结构光系统仿真建模和误差灵敏度分析

结构光系统目前在三维测量、逆向工程等领域应用日益广泛,然而关于结构光系统性能评测方法的研究成果仍然很少,仅有少数国际标准给出了3D扫描系统的性能评测方法.本文首先建立了双目结构光系统的仿真模型,其中包括了相机镜头畸变模型和针孔成像模型,实现投影仪投射数字正弦条纹的仿真和被扫描的靶球特征量仿真计算,采用的三维重建方法为光学三角法.然后基于仿真模型,对其基线距离相关的误差灵敏度进行了仿真,发现靶球中心位置和靶球球心距对基线距离误差具有较高的灵敏度,可以作为测试方法的输出.最后,如果只考虑基线距离误差,标准测试方法中的校准球棒的位置应在测量范围内的相对距离尽可能大,为标准性能评测方法提供了改进建议.